Pages

Contributors

My professional profile on Linkedin

View James Alexander's profile on LinkedIn

Where my visitors are

A380's TRENT XWB

Materials Science and Engineering, Durable Development, Recycling..

Custom Search

Blog List-Free Science and Engineering Information Resources cf also Side and Bottom menu bars

Scientific Reports - nature.com science feeds

Physical sciences : nature.com subject feeds

Materials science : nature.com subject feeds

Monday, 24 June 2013

Innovation, Innovations! Innovations win the 82th, 24hrs Le Mans motor race, Audi again, Toyota on the podium.

ACKNOWLEDGEMENT...
This title "cry" is however marred was marred by the death of Aston Martin pilot Allan Simonsen and bad weather that caused several minor accidents.

THE LE MANS WINNER

Nevertheless Innovation is still the big, big winner of this 82th edition of the iconic Le Mans' race. And it's an Audi hybrid that does it once again following on from last years success. 

The Audi R18 e-tron quattro N° 2 took first place in this year's edition of this years (2013) endurance race, marking the car's second consecutive victory and Audi's twelfth overall win.  

The three man winning team was Loïc Duval, (France) Allan McNish (Scotland) and last but not least Tom Kristensen, nine times winner of Le Mans six of which were consecutive (Denmark), Audi's diesel-electric hybrid race car finished the race a full lap ahead of the runner up, a Toyota TS0030 driven by Nicolas Lapierre, Kazuki Nakajima and Alexander Wurz.  The R18 e-tron logged 348 laps of the Circuit de la Sarthe, which equates to roughly 3,000 miles.

INNOVATIONS

The carbon fiber-bodied R18 e-tron packs a technologically-advanced diesel-electric hybrid drive-train that uses an electric flywheel accumulator to store the kinetic energy that is generated when the brakes are applied.  Active only above 75 mph, the system sends power to two electric motors that spin the front wheels and give the car a noticeable acceleration boost.

The rear wheels are driven by a 3.7-liter V6 TDI turbodiesel and are not linked to the hybrid setup.   Mated to a six-speed electronically-operated sequential gearbox, the oil-burner produces over 626 lb-ft. of torque and about 500 horsepower.


SUSPENSION SYSTEM AUDI-R18 e-Tron-Quattro
CREDIT TO WINNING TEAM-ENGINEERS & PILOTES FROM THE TOP...


Audi credits the hybrid setup for enabling the R18 to beat Toyota and come out on top.

“We owe the twelfth victory of our brand at Le Mans to the consistent, innovative spirit of our engineers, the unconditional commitment of the entire team and the skills and strong nerves of our drivers. On behalf of Audi, I extend my sincere congratulations on this success to all of them,” said Audi Chairman Rupert Stadler.

Read more

TOYOTA Racing achieved an emotional runners-up finish in the Le Mans 24 Hours after a rollercoaster race which saw drivers and team overcome immense challenges.
The N° 8 TS030 HYBRID of Anthony Davidson (UK), Sébastien Buemi (Switzerland) and Stéphane Sarrazin(France) finished second while the N° 7 of Alex Wurz, Nicolas Lapierre and Kazuki Nakajima completed a satisfying week for the team by taking fourth.

SUSPENSION SYSTEM TS030



Read More...

FROM THE WINNERS HOME PAGES

The future of AudiBegins on the track at Le Mans one learns from Audi motosport website

Audi is consistently pushing the envelope when it comes to design and performance. Last year, Audi was the first team to win using hybrid technology. Before that? The first team to win using TDI® clean diesel technology—for six consecutive years. This year, Audi is out to do it again. Winning is in our heritage. And the R18 e-tron® quattro® is poised to make history again.

SOME HISTORY

A legacy of successWinning on the racetrack and on the road.

Audi burst onto the scene in the 1980s with the now legendary quattro® all-wheel drive—dominating the World Rally Championship. Starting in 2001, win after consecutive win was ushered in at Le Mans with the help of TFSI® engine technology. The victories continued with the revolutionary development of TDI® clean diesel engine technology—unleashing more power and increasing fuel efficiency. All of these pioneering innovations ultimately made their way into production models, utilizing racetrack performance on the open road. And that’s the real win.

MORE:


LAST BUT NOT LEAST "THE SHOES" - OUTSTANDING TYRES

Michelin’s endurance racing tyres stand out from those of its rivals thanks to their balanced ‘Michelin Total Performance’ package which offers longer life and better grip combined with consistency and safety.
That is why Michelin supplies more than 60 percent of the grid for the Le Mans 24 Hours.
Prior to the creation of the FIA World Endurance Championship (WEC) in 2012, the development of tyres for the discipline was chiefly geared to the Le Mans 24 Hours, where the longevity and consistency of Michelin’s solutions allowed the firm’s partners to multi-stint in total safety with no drop-off in performance. Multi-stinting meant less time spent in the pits to have fresh rubber fitted.
Today’s development work covers tyres for both Le Mans and the WEC, although there are not two distinct ranges. On the contrary, the objective for Michelin Motorsport’s engineers and developers and their colleagues at the Michelin Technology Centre has been to produce a selection of versatile products which are competitive at all the circuits visited during the season, as well as for the different race formats. The tyres developed by Michelin for its partners in the WEC are not available for general sale.

Wednesday, 19 June 2013

Electropulsing metal and alloys,a path to ultra-clean metals & alloys

The Electropulsing process consists of passing high density electric pulses through the liquid metal (eg. steel).
A typical rapid pulse lasts  1/50,000 seconds. The low conductivity of non-metallic particles (inclusions)  in high conductivity liquid metals, say liquid steel, has been shown to both influence the inclusion formation and better expulse the inclusions from the liquid metal. Naturally an inclusion trap is necessary. The technique is an important improvement on other methods such as electromagnetic stirring or inert gas bubbling which tend to limit the smallest inclusions to 20 microns in size, too large for ultra clean applications (eg. steels for large surface applics., knives or high duty - high reliability applications.)

Such Technology and Processing has already caught the attention of Steelmaking Giants, India's TATA, Korean POSCO and  etc.

Prof Rongshan Qin has been publishing in the field of electropulsing metal technology especially liquid steels and metals since around 1996, over a substantial period of 18years.

His work and his current backing were brought to my attention by an article in my Institute (IOM3) House Journal "Materials World" full reference to MW's article cf. below.

A short list of  Prof Qin's publications chosen from his website at Imperial College London in order to give a rapid view of the electropulsed process and technology in metals and alloys(steel) are as follows:
  
- A healing model for metallic materials: theoretical study, BIOMIMETICS, 1996, Vol:4, Pages:121-128

- Solidification of Pb-Sn alloy under electropulsings, ACTA METALL SINICA, 1997, Vol:32, Pages:352-356

 - Effect of electric current pulses on grain size in castings, INTERNATIONAL JOURNAL OF NON-EQUILIBRIUM PROCESSING, 1998, Vol:11, Pages:77-86, ISSN:1368-9290

- Accelerated spheroidization induced by high intensity electric pulse in a severely deformed eutectoid steel, Journal of Materials Research, 2010, Vol:25, Pages:1020-1024.

- Effect of electropulsing on grain refinement of a medium carbon low alloy steel, Advanced Materials Research, 2011, Vol:146-147, Pages:1849-1854

-  Electropulse-induced cementite nanoparticle formation in deformed pearlitic steels, Journal of Materials Science, 2011, Vol:46, Pages:2838-2842, ISSN:0022-2461

- The effect of hot- and cold-rolling on the electropulse-induced microstructure and property changes in medium carbon low alloy steels, Steel Research International, 2013, Vol:84, Pages:443-4

-Removal of MnS inclusions in molten steel using electropulsing, Scripta Materialia, 2013, ISSN:1359-6462

Full list of Publications


Dr. Rongshan Qin, biography


Materials World, Vol.21, Issue 3, Page 19 (2013). Pulsating steel - quicker and cleaner fabrication

Companies which show an interest are POSCO Corea, TATA-India and Wuhan Steel Co - China, to mention but a few probably,2010 ref MW. V21  & R. Qin Research, Imperial College London


Thursday, 13 June 2013

As indicated in my management blog "This-Above-All" I am removing all Amazon publicity from my blogs

The reasons for this are given in my blog post, ref. below

The "Public Debt Issue_Who is in debt & to Whom? plus questions of probity concerning elected members of the French Assembly(Deputés) or Senate(Senateurs)

In a couple of words: Tax evasion, 

Unfair gov assistance compaired to the small librarian-bookshop 
Such ill practise is of course widespread which does not mean that it adhears to the notion of "good-will."
some term this as "Tax optimisation when the more exact term is Tax Minimisation.

Read my link above based upon a French TV Special Enquiry whoes essence I have translated to English
For bilingual readers the video on the enquiry by France 2 - Antenne 2 reporters is in French and is a good way to brush up ones foreign languages.

Add your voice and comments to correc, even in a small way, such ill-practise. The general public "the honest Joes are not paying Tax owed by others (Fraudulent Companies and their lobbied henchmen in politics in the enquiry refrence above. 

Tuesday, 11 June 2013

Monday, 10 June 2013

Fraunhofer UK launch from Materials World Blog

I have just added Materials World's blog to My list of blogs followed that may be found at the foot of my page following the leading blog posts.

I selected the article by Rachel Lawler from which I have taken the following:

"The UK branch of Fraunhofer, Europe’s biggest applied research organisation, at the Royal Academy of Engineering in London. The not-for-profit company will partner with UK universities and industry to ensure that the best research makes the transition into commercial success.
The project is already underway with the Fraunhofer Centre for Applied Photonics open at the University of Strathclyde. Professor Martin Dawson, head of the new centre, was also in attendance and feeling optimistic about the future of his field thanks to the launch. Since the centre opened in October last year, the field seems to have gone from strength to strength – Dawson estimated that the project has so far secured contracts worth £1.5m. ‘Photonics is often described as the “electronics of the 21st Century”[…] the academic strength of the UK in this area is internationally recognised,’ he said. And while he though it was ‘fitting’ that the first Fraunhofer centre focused on this area of UK expertise, Dawson hoped not to be alone as a Head of Centre for very much longer, as Fraunhofer UK looks to open more centres in the near future."

"Hear, hear"! Perhaps there is a lesson here for other EU countries.
Comments most welcome such is the impact of industrial restructuring in the EU!

Friday, 31 May 2013

PV energy is 40 times more efficient than the best bio-fuels_"Let the sun shine"- on INNOVATIONS!

In his paper in the magazine bioplastics entitled "From the (agricultural) field to the (car) wheel"
Michael Carus, Managing Director of the nova-Institute Hürth Germany attempts to answer the following 
Millennium class questions: " What will be the future of mobility?" and "Which solution is both land-efficient
and sustainable?"

On the one hand Biofuel (photosynthesis based) candidates are biodiesel,bioethanol, BTL 
(biomass to liquid) and on the other is PV-photovoltaic which they call "e-mobility." 

In this work they compare land efficiency (average energy yield per hectare for different biofuels
with that of a solar driven electric car hence the title of their article 
"from the agricultural field to the car wheel"

Naturally German conditions are used but the author argues that there is little difference 
compared to other regions. He explains this in simple terms

The energy figures for both approaches are listed for easy comparison.

The full article may be found at the following link:

From the field to the wheel_Feb 17, 2012

PS "Is there any urgent need need for shale gas and oil via fracking?" Comments more than welcome.

Wednesday, 29 May 2013

End-of-Life Tyres (ELTs). update and review by B. Messenger Editor of Waste Management World magazine

This article was my first choice to introduce readers to the Waste Management World magazine. Indeed it was not so long ago that local authorities in my region of France-La Nièvre voiced their concern about the problems caused by used tyres and their ever increasing stock piles.

TACKLING TYRE WASTE


Tackling Tyres
With the rapidly growing number of vehicles around the world, the disposal of end-of-life tyres is a growing issue. Often simply dumped by the million to pose a serious environmental, health and fire risk, the technology to recover higher value materials and energy from waste tyres is moving forward.

The recovery of energy and materials from used tyres is big business. According to a report by the World Business Council for Sustainable Development, in 2008 around one billion End-of-Life Tyres (ELTs) were being produced globally each year. A further four billion were estimated to be held in stockpiles and landfills. Around the world it is estimated that some 1.5 billion new tyres are produced annually.
Figures published by the U.S. Rubber Manufacturers Association estimate that the U.S. - the world's largest producer of ELTs - generated 291.8 million tyres in 2009. With an average weight of 33.4 pounds (15.1 kg) that equates to some 4.4 million tonnes. According to statistics published by the European Tyre & Rubber Manufacturers' Association (ETRMA), in 2010 Europe produced around 2.7 million tonnes of ELTs.

TRADITIONAL APPROACHES:
Using traditional recycling techniques, granulated rubber recovered from waste tyres can be used variously as an aggregate, in tiles, adhesives, asphalt, sports surfaces, and extruded rubber products, to name but a few of its uses. And in terms of energy recovery the natural rubber fraction of the tyre can be considered as a renewable energy source.



REASONS TO GET MORE TOP CHEMICAL ENGINEERS  MANAGERS INVOLVED. 
With so many ELTs being produced, as well as the huge stockpiles from the past, waste tyres pose many potential dangers. They can contaminate groundwater, harbour disease carrying mosquitoes in pooled water and they are not only flammable, but once ablaze, extremely difficult to extinguish.
Often the result of arson, fires at tyre dumps are not uncommon. In 1990 Hagersville, Ontario was the scene of one of the worst tyre fires in history. As a mechanised army of fire fighters struggled to gain control of the situation, for 17 days 14 million tyres packed onto the 11 acre site spewed toxic clouds of thick black smoke into the air.
According to the New York Times, in addition to the toxic fumes, around 158,000 gallons (600,000 litres) of oil was released by the melting rubber was collected from the site. Chemical pollutants, suspected to have been caused by the operation to extinguish the fire were also found in the aftermath of the blaze.
In a separate incident an underground dumpsite in Wales,[UK] thought to contain around 9 million tyres, burned for an astonishing 15 years following its ignition in 1989.

HOPE ON HAND-High Value Alternatives
While the recovery of rubber, steel and energy from a potentially hazardous waste stream is certainly a big improvement over the not too distant past, increasingly a number of projects around the world are looking to ELTs as a potential source of much higher value materials.
One example of this is Dynamic Energy Alliance Corporation (DEAC), which recently relocated its headquarters from Memphis Tennessee to Dallas, Texas. The company has initiated the prototype phase of a project to validate its patent pending technologies to extract high value organic compounds from waste tyres. DEAC's process involves using pyrolysis to process ELTs with the production not only of energy, but of five marketable products – recycled carbon black, pyrolysis oil, fuel and extracts, a high BTU gas and steel.
The process the company is developing melds two technologies that it recently acquired licenses for, the Terpen Kraftig (TKF) Fractionator and Pyrolytic Augmentation.
The Pyrolytic Augmentation technology includes a series of specialised chemical compounds, which when combined within a pyrolysis plant are intended to enable the decomposition of the tyres to occur at lower temperatures - which would be a critical energy-saving benefit.
According to DEAC, a reactor technology included in the license allows it to recover additional high value organic compounds during tyre processing by changing the chemical reaction that's part of the de-vulcanization process used to convert the tyres' rubber into valuable products.
"The intellectual property includes a class of catalysts new to this industry but with exciting potential to improve the economics of waste tyre processing," explains Dr. Earl Beaver, chief technology officer of DEAC.
"The lower temperature enabled through the catalysts should allow for lower energy costs, lower maintenance costs and higher outputs of the most valuable liquid products and carbon black from tyre pyrolysis," he continues.
The TKF Fractionator process will capture the friable materials in the pyrolysis oil and purify them into high value organic compounds used in the fragrance, cosmetic and solvent industries - without disturbing the oil's hydrocarbon market value.
According to the company, the TKF processes, as adapted to its specifications, would produce up to 20 individual components at purity levels that are in high demand.
The process would consist of a series of unit operations functioning at a narrow range of temperatures, pressures, and volumes – which DEAC anticipates to yield the separation needed to maintain the purity and value of the products. Some of the 20 materials would be made in high purity for use as feedstock for downstream products, while others would be synthetic versions of natural products such as flavours, extracts and essential oils.
While the technology is still in the prototype phase, Charles R. Cronin, Jr., DEAC's chairman, is confident: "We believe these combined processes have the potential to produce more energy than the sum of the energy used to make the original tyre plus the energy expended to recover the products. These technologies may have the ability to transform the waste tyre industry from a landfill or rubber products business into a specialty chemical business."
Cronin added that the additional value will soon be validated in a life cycle analysis.(LCA)

The Tygre Project

is an EU project and consortium involving a number of commercial and academic European organisations

PYReco

Based in Redcar in the North East of England, PYReco is planning a facility which will use pyrolysis to breakdown tyres into high tensile steel, carbon black, diesel oil and syngas without producing any waste.





Conclusions


Ben Messenger, Managing Editor of WMW Magazine concludes: 
"While there are still some concerns surrounding illegal dumping or exporting of ELTs, the high recovery rates both in the U.S. and Europe are encouraging. However, in common with other waste streams, the greatest environmental and economic benefits from the treatment of ELTs lie furthest up the waste hierarchy.
Given the expanding global vehicle base, and the consumable nature of tyres, prevention is probably unattainable. Indeed, for the foreseeable future the number of waste tyres being generated globally will continue to grow. And for passenger car tyres, reuse options, such as retreading, are limited.
While the use of tyres as TDF is certainly better than landfilling or stockpiling, there are many interesting projects on the horizon which offer the potential of recovering not only energy or low value materials, but a wide range of high value materials and energy.
Around the world such projects are numerous. Not all will be commercially successful, but there are simply too many to think that none will make it. The date may not yet have been set, but the way in which waste tyres are treated looks set for a revolution."

High Purity Cr sources for Superalloys

Energy for th Future:Phil.Trans.A-Vol. 365, N° 1853 / April 15, 2007, curtesy The Royal Soc. London

Engineered foams and porous materials: Phil Trans A. Vol 364, N° 1838 / 06 curtesy_The R Soc. Lond